Veritas Volume Manager 5.0 Migration Guide, HP-UX 11i v3, First Edition, May 2008

73SMH and the VEA

Displaying logical volumes in SMH

To display logical volumes in SMH, select Tools > Disks and File Systems >

Logical Volumes. The Logical Volumes screen lists the LVM logical volumes and

VxVM volumes on the system. The “Type” column indicates whether a volume is

controlled by LVM or VxVM. The “Use” column shows whether a volume is in

use and if so, what it is used for.

A more detailed description of a logical volume’s properties can be obtained by

selecting the radio button to the left of a listed volume. However, you should use

the VEA to obtain full details of VxVM volumes.

Figure 4-3 shows an example Logical Volumes screen. The LVM logical volumes

in the vg00 volume group are being used for HFS and VxFS file systems and for

swap and dump. The myvol1 and myvol2 VxVM volumes in the mydg disk

group are being used for VxFS and HFS file systems. The remaining VxVM

volume, myvol3, is not currently in use.