Veritas Volume Manager 5.0 Migration Guide, HP-UX 11i v3, First Edition, May 2008

65Command differences
Comparison of LVM and VxVM tasks
VxVM Resynchronize operations for the
named volumes, or for volumes
residing on the named disks.
If no medianame or volume
operands are specified, then the
operation applies to all volumes.
vxrecover -s vol_name
LVM Start a volume. lvchange -a y /dev/vol_grp/
lvol_name
VxVM Start a volume. vxrecover -s vol_name
vxvol start vol_name
LVM Stop a volu me. lvchange -a n /dev/vol_grp/
lvol_name
VxVM Stop a volume. vxvol stop vol_name
LVM Make a disk available as a hot
spare.
pvchange -z y /dev/dsk/disk_name
VxVM Make a disk available as a hot
spare.
vxedit set spare=on disk_name
Table 3-2 LVM and VxVM task comparison
Task
type
Description Example
Example for a disk_group = veritasdg, medianame = disk01, vol_name -= veritasvol, plex name
= veritasvol-01, subdisk -= disk01-01, devicename = c0t0d0.