Veritas Volume Manager 5.0 Administrator's Guide (September 2006)

446 Using Storage Expert
Rule definitions and attributes
Note: You can use the list and check keywords to show what attributes are available for
a rule and to display the default values of these attributes. See “Running a rule” on
page 437 for more information.
vxse_rootmir Checks that all root mirrors are set up correctly.
vxse_spares Checks that the number of spare disks in a disk group is within the VxVM
“Best Practices” thresholds.
vxse_stripes1 Checks for stripe volumes whose stripe unit is not a multiple of the default
stripe unit size.
vxse_stripes2 Checks for stripe volumes that have too many or too few columns.
vxse_volplex Checks for volumes and plexes that are in various states, such as:
■ disabled plexes
■ detached plexes
■ stopped volumes
■ disabled volumes
■ disabled logs
■ failed plexes
■ volumes needing recovery
Table 15-1 Rule definitions in Storage Expert
Rule Description
Table 15-2 Rule attributes and default attribute values
Rule Attribute Default value Description
vxse_dc_failures - - No user-configurable variables.
vxse_dg1 max_disks_per_dg 250 Maximum number of disks in a disk
group. Warn if a disk group has more
disks than this.
vxse_dg2 - - No user-configurable variables.
vxse_dg3 - - No user-configurable variables.
vxse_dg4 - - No user-configurable variables.
vxse_dg5 - - No user-configurable variables.
vxse_dg6 - - No user-configurable variables.
vxse_disk - - No user-configurable variables.
vxse_disklog - - No user-configurable variables.