VERITAS Volume Manager 4.1 Troubleshooting Guide

Error Messages
Understanding Messages
Chapter 674
• Action: None; under normal startup conditions, this message should not occur. If
necessary, start VxVM and re-attempt the operation.
V-5-0-194
VxVM vxio WARNING V-5-0-194 Kernel log full: volume detached
• Description: A plex detach failed because the kernel log was full. As a result, the mirrored
volume will become detached.
• Action: It is unlikely that this condition ever occurs. The only corrective action is to reboot
the system.
V-5-0-196
VxVM vxio WARNING V-5-0-196 Kernel log update failed: volume detached
• Description: Detaching a plex failed because the kernel log could not be flushed to disk. As
a result, the mirrored volume became detached. This may be caused by all the disks
containing a kernel log going bad.
• Action: Repair or replace the failed disks so that kernel logging can once again function.
V-5-0-207
VxVM vxio WARNING V-5-0-207 log object object_name detached from RAID-5 volume
• Description: Indicates that a RAID-5 log has failed.
• Action: To restore RAID-5 logging to a RAID-5 volume, create a new log plex and attach it
to the volume.
V-5-0-216
VxVM vxio WARNING V-5-0-216 mod_install returned errno
• Description: A call made to the operating system mod_install function to load the vxio
driver failed.
• Action: Check for additional console messages that may explain why the load failed. Also
check the console messages log file for any additional messages that were logged but not
displayed on the console.
V-5-0-237
VxVM vxio WARNING V-5-0-237 object subdisk detached from RAID-5 volume at column
column offset offset