VERITAS Volume Manager 4.1 Troubleshooting Guide

Error Messages

Understanding Messages

Chapter 672

V-5-0-145

VxVM vxio WARNING V-5-0-145 DRL volume volume is detached

• Description: A Dirty Region Logging volume became detached because a DRL log entry

could not be written. If this is due to a media failure, other errors may have been logged to

the console.

• Action: The volume containing the DRL log continues in operation. If the system fails

before the DRL has been repaired, a full recovery of the volume’s contents may be

necessary and will be performed automatically when the system is restarted. To recover

from this error, use the vxassistaddlog command to add a new DRL log to the volume.

V-5-0-146

VxVM vxdmp NOTICE V-5-0-146 enabled controller controller_name connected to disk

array disk_array_serial_number

• Description: All paths through the controller connected to the disk array are enabled. This

usually happens if a controller is enabled after maintenance.

• Action: None.

V-5-0-147

VxVM vxdmp NOTICE V-5-0-147 enabled dmpnode dmpnode_device_number

• Description: A DMP node has been marked enabled in the DMP database. This happens

when at least one path controlled by the DMP node has been enabled.

• Action: None.

V-5-0-148

VxVM vxdmp NOTICE V-5-0-148 enabled path path_device_number belonging to dmpnode

dmpnode_device_number

• Description: A path has been marked enabled in the DMP database. This path is

controlled by the DMP node indicated by the speciﬁed device number. This happens if a

previously disabled path has been repaired, the user has reconﬁgured the DMP database

using the vxdctl(1M) command, or the DMP database has been reconﬁgured

automatically.

• Action: None.

V-5-0-164

VxVM vxio WARNING V-5-0-164 Failed to join cluster name, aborting