VERITAS Volume Manager 4.1 Troubleshooting Guide

Error Messages
Understanding Messages
Chapter 6102
• Description: The disk group could not be activated because it is activated in a conflicting
mode on another node in a cluster.
• Action: Retry later, or deactivate the disk group on conflicting nodes.
V-5-1-3049
VxVM vxconfigd ERROR V-5-1-3049 Retry rolling upgrade
• Description: An attempt was made to upgrade a cluster to a higher protocol version when
a transaction was in progress.
• Action: Retry the upgrade at a later time.
V-5-1-3050
VxVM vxconfigd ERROR V-5-1-3050 Version out of range for at least one
node
• Description: Before trying to upgrade a cluster by running vxdctlupgrade, all nodes
should be able to support the new protocol version. An upgrade can fail if at least one of
them does not support the new protocol version.
• Action: Make sure that the VERITAS Volume Manager package that supports the new
protocol version is installed on all nodes and retry the upgrade.
V-5-1-3091
VxVM vxdg ERROR V-5-1-3091 diskname : Disk not moving, but subdisks on
it are
• Description: Some volumes have subdisks that are not on the disks implied by the
supplied list of objects.
• Action: Use the -oexpand option to vxdglistmove to produce a self-contained list of
objects.
V-5-1-3212
VxVM vxconfigd ERROR V-5-1-3212 Insufficient DRL log size: logging is
disabled.
• Description: A volume with an insufficient DRL log size was started successfully, but DRL
logging is disabled and a full recovery is performed.
• Action: Create a new DRL of sufficient size.