VERITAS Volume Manager 4.1 Troubleshooting Guide
Error Messages
Understanding Messages
Chapter 6 101
• Action: Before retrying the join, use vxdgreminor (see the vxdg(1M) manual page) to
choose a new minor number range either for the disk group on the master or for the
conflicting disk group on the slave. If there are open volumes in the disk group, the
reminor operation will not take effect until the disk group is deported and updated (either
explicitly or by rebooting the system).
V-5-1-3032
VxVM vxconfigd ERROR V-5-1-3032 Master sent no data
• Description: During the slave join protocol, a message without data was received from the
master. This message is only likely to be seen in the case of an internal VxVM error.
• Action: Contact VERITAS Technical Support.
V-5-1-3033
VxVM vxconfigd ERROR V-5-1-3033 Join in progress
• Description: An attempt was made to import or deport a shared disk group during a
cluster reconfiguration.
• Action: Retry when the cluster reconfiguration has completed.
V-5-1-3034
VxVM vxconfigd ERROR V-5-1-3034 Join not currently allowed
• Description: A slave attempted to join a cluster when the master was not ready. The slave
will retry automatically.
• Action: No action is necessary if the join eventually completes. Otherwise, investigate the
cluster monitor on the master.
V-5-1-3042
VxVM vxconfigd ERROR V-5-1-3042 Clustering license restricts operation
• Description: An operation requiring a full clustering license was attempted, and such a
license is not available.
• Action: If the error occurs when a disk group is being activated, dissociate all but one plex
from mirrored volumes before activating the disk group. If the error occurs during a
transaction, deactivate the disk group on all nodes except the master.
V-5-1-3046
VxVM vxconfigd ERROR V-5-1-3046 Node activation conflict