Veritas Volume Manager 4.1 Troubleshooting Guide (HP-UX 11i v3, February 2007)

Chapter 6, Error Messages

Understanding Messages

V-5-1-3049

VxVM vxconfigd ERROR V-5-1-3049 Retry rolling upgrade

◆ Description: An attempt was made to upgrade a cluster to a higher protocol version

when a transaction was in progress.

◆ Action: Retry the upgrade at a later time.

V-5-1-3050

VxVM vxconfigd ERROR V-5-1-3050 Version out of range for at least one

node

◆ Description: Before trying to upgrade a cluster by running vxdctl upgrade, all nodes

should be able to support the new protocol version. An upgrade can fail if at least one

of them does not support the new protocol version.

◆ Action: Make sure that the VERITAS Volume Manager package that supports the new

protocol version is installed on all nodes and retry the upgrade.

V-5-1-3091

VxVM vxdg ERROR V-5-1-3091 diskname : Disk not moving, but subdisks on

it are

◆ Description: Some volumes have subdisks that are not on the disks implied by the

supplied list of objects.

◆ Action: Use the -o expand option to vxdg listmove to produce a self-contained list

of objects.

V-5-1-3212

VxVM vxconfigd ERROR V-5-1-3212 Insufficient DRL log size: logging is

disabled.

◆ Description: A volume with an insufficient DRL log size was started successfully, but

DRL logging is disabled and a full recovery is performed.

◆ Action: Create a new DRL of sufficient size.