Veritas Volume Manager 4.1 Troubleshooting Guide (HP-UX 11i v3, February 2007)
Understanding Messages
88 VERITAS Volume Manager Troubleshooting Guide
V-5-1-3032
VxVM vxconfigd ERROR V-5-1-3032 Master sent no data
◆ Description: During the slave join protocol, a message without data was received from
the master. This message is only likely to be seen in the case of an internal VxVM
error.
◆ Action: Contact VERITAS Technical Support.
V-5-1-3033
VxVM vxconfigd ERROR V-5-1-3033 Join in progress
◆ Description: An attempt was made to import or deport a shared disk group during a
cluster reconfiguration.
◆ Action: Retry when the cluster reconfiguration has completed.
V-5-1-3034
VxVM vxconfigd ERROR V-5-1-3034 Join not currently allowed
◆ Description: A slave attempted to join a cluster when the master was not ready. The
slave will retry automatically.
◆ Action: No action is necessary if the join eventually completes. Otherwise, investigate
the cluster monitor on the master.
V-5-1-3042
VxVM vxconfigd ERROR V-5-1-3042 Clustering license restricts operation
◆ Description: An operation requiring a full clustering license was attempted, and such a
license is not available.
◆ Action: If the error occurs when a disk group is being activated, dissociate all but one
plex from mirrored volumes before activating the disk group. If the error occurs
during a transaction, deactivate the disk group on all nodes except the master.
V-5-1-3046
VxVM vxconfigd ERROR V-5-1-3046 Node activation conflict
◆ Description: The disk group could not be activated because it is activated in a
conflicting mode on another node in a cluster.
◆ Action: Retry later, or deactivate the disk group on conflicting nodes.