Veritas Volume Manager 4.1 Troubleshooting Guide (HP-UX 11i v3, February 2007)

Chapter 6, Error Messages
Understanding Messages
63
V-5-1-116
VxVM vxconfigd WARNING V-5-1-116 Cannot open log file log_filename:
reason
◆ Description: The vxconfigd console output log file could not be opened for the given
reason.
◆ Action: Create any needed directories, or use a different log file path name as
described in “Logging Error Messages” on page 49.
V-5-1-117
VxVM vxconfigd ERROR V-5-1-117 Cannot start volume volume, no valid
plexes
◆ Description: This error indicates that the volume cannot be started because it does not
contain any valid plexes. This can happen, for example, if disk failures have caused all
plexes to be unusable. It can also happen as a result of actions that caused all plexes to
become unusable (for example, forcing the dissociation of subdisks or detaching,
dissociation, or offlining of plexes).
◆ Action: It is possible that this error results from a drive that failed to spin up. If so,
rebooting may fix the problem. If that does not fix the problem, then the only recourse
is to repair the disks involved with the plexes and restore the file system from a
backup.
V-5-1-121
VxVM vxconfigd NOTICE V-5-1-121 Detached disk disk
◆ Description: The named disk appears to have become unusable and was detached
from its disk group. Additional messages may appear to indicate other records
detached as a result of the disk detach.
◆ Action: If hot-relocation is enabled, VERITAS Volume Manager objects affected by the
disk failure are taken care of automatically. Mail is sent to root indicating what
actions were taken by VxVM and what further actions the administrator should take.