Veritas Volume Manager 4.1 Troubleshooting Guide (HP-UX 11i v3, February 2007)

Chapter 6, Error Messages
Understanding Messages
61
V-5-0-252
VxVM vxio NOTICE V-5-0-252 read error on object subdisk of mirror plex
in volume volume (start offset length length) corrected
◆ Description: A read error occurred, which caused a read of an alternate mirror and a
writeback to the failing region. This writeback was successful and the data was
corrected on disk.
◆ Action: None; the problem was corrected automatically. Note the location of the failure
for future reference. If the same region of the subdisk fails again, this may indicate a
more insidious failure and the disk should be reformatted at the next reasonable
opportunity.
V-5-0-258
VxVM vxdmp NOTICE V-5-0-258 removed disk array disk_array_serial_number
◆ Description: A disk array has been disconnected from the host, or some hardware
failure has resulted in the disk array becoming inaccessible to the host.
◆ Action: Replace disk array hardware if this has failed.
V-5-0-386
VxVM vxio WARNING V-5-0-386 subdisk subdisk failed in plex plex in
volume volume
◆ Description: The kernel has detected a subdisk failure, which may mean that the
underlying disk is failing.
◆ Action: Check for obvious problems with the disk (such as a disconnected cable). If
hot-relocation is enabled and the disk is failing, recovery from subdisk failure is
handled automatically.
V-5-1-90
VxVM vxconfigd ERROR V-5-1-90 mode: Unrecognized operating mode
◆ Description: An invalid string was specified as an argument to the -m option. Valid
strings are: enable, disable, and boot.
◆ Action: Supply a correct option argument.