VERITAS Volume Manager 4.1 Administrator's Guide

Administering Disks
Disk Devices
Chapter 2 65
The syntax of a device name is c#t#d#, where c# represents a controller on a host bus adapter,
t# is the target controller ID, and d# identifies a disk on the target controller.
Fabric mode disk devices are named as follows:
Disk in supported disk arrays are named using the enclosure name_# format. For
example, disks in the supported disk array name FirstFloor are named FirstFloor_0,
FirstFloor_1, FirstFloor_2 and so on. (You can use the vxdmpadm command to
administer enclosure names.)
Disks in the DISKS category (formerly know as JBOD disks) are named using the Disk_#
format.
Disks in the OTHER_DISKS category are named using the fabric_# format
Enclosure Based Naming Scheme
The enclosure-based naming scheme operates as follows:
Devices with very long device names (for example, Fibre Channel devices that include
worldwide name (WWN) identifiers) are always represented by enclosure-based names.
All fabric or non-fabric disks in supported disk arrays are named using the
enclosure_name_# format. For example, disks in the supported disk array, enggdept are
named enggdept_0, enggdept_1, enggdept_2 and so on. (You can use the vxdmpadm
command to administer enclosure names. See Administering DMP Using vxdmpadm” on
page 132 and the vxdmpadm(1M) manual page for more information.)
Disks in the DISKS category (formerly known as JBOD disks) are named using the
Disk_# format.
Disks in the OTHER_DISKS category are named as follows:
Non-fabric disks are named using the c#t#d# format.
Fabric disks are named using the fabric_# format.
See “Changing the Disk-Naming Scheme” on page 78 for details of how to switch between the
two naming schemes.
To display the native OS device names of a VM disk (such as disk01), use the following
command:
# vxdisk list diskname
For information on how to rename an enclosure, see “Renaming an Enclosure” on page 146.
For a description of disk categories, see “Disk Categories” on page 69.