VERITAS Volume Manager 4.1 Administrator's Guide

Creating and Administering Subdisks
Displaying Subdisk Information
Chapter 5200
Displaying Subdisk Information
The vxprint command displays information about VxVM objects. To
display general information for all subdisks, use this command:
# vxprint -st
The -s option specifies information about subdisks. The -t option prints a
single-line output record that depends on the type of object being listed.
The following is example output:
SD
NAME PLEX DISK DISKOFFS LENGTH [COL/]OF
F DEVICE MODE
SV
NAME PLEX VOLNAME NVOLLAYR LENGTH [COL/]OF
F AM/NM MODE
sd disk01-01 vol1-01 disk01 0 102400 0
c0t10d0 ENA
sd disk02-01 vol2-01 disk02 0 102400 0
c0t10d0 ENA
You can display complete information about a particular subdisk by
using this command:
# vxprint -l subdisk
For example, the following command displays all information for subdisk
disk02-01:
# vxprint -l disk02-01
This command provides the following output:
Disk group: rootd
gSubdisk: disk02-01
info: disk=disk02 offset=0 len=205632
assoc: vol=mvol plex=mvol-02 (offset=0)
flags: enableddevice: device=c2t0d1c0t10d0
diskdev=32/68