VERITAS Volume Manager 4.1 Administrator's Guide

Administering Dynamic Multipathing (DMP)
Administering DMP Using vxdmpadm
Chapter 3134
c2t3d0 ENABLED SECONDARY c2t3d0 ACME enc0
c2t4d0 ENABLED SECONDARY c2t4d0 ACME enc0
Listing Information About Host I/O Controllers
The following command lists attributes of all host I/O controllers on the system:
# vxdmpadm listctlr all
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c0 OTHER ENABLED others0
c1 X1 ENABLED jbod0
c2 ACME ENABLED enc0
c3 ACME ENABLED enc0
This form of the command lists controllers belonging to a specified enclosure and enclosure
type:
# vxdmpadm listctlr enclosure=enc0 type=X1
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c2 ACME ENABLED enc0
c3 ACME ENABLED enc0
Listing Information About Enclosures
To display the attributes of a specified enclosure, use the following command:
# vxdmpadm listenclosure enc0
The following example displays all attributes associated with the enclosure named enc0:
ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE
========================================================================
enc0 A3 60020f20000001a90000 CONNECTED A/P
The following command lists attributes for all enclosures in a system:
# vxdmpadm listenclosure all
The following is example output from this command: