Veritas Volume Manager 4.1 Administrator's Guide (HP-UX 11i v3, February 2007)

399
Performance Monitoring and Tuning
15
VERITAS Volume Manager (VxVM) can improve overall system performance by
optimizing the layout of data storage on the available hardware. This chapter contains
guidelines establishing performance priorities, for monitoring performance, and for
configuring your system appropriately.
Performance Guidelines
VxVM allows you to optimize data storage performance using the following two
strategies:
◆ Balance the I/O load among the available disk drives.
◆ Use striping and mirroring to increase I/O bandwidth to the most frequently accessed
data.
VxVM also provides data redundancy (through mirroring and RAID-5) that allows
continuous access to data in the event of disk failure.
Data Assignment
When deciding where to locate file systems, you, as a system administrator, typically
attempt to balance I/O load among the available disk drives. The effectiveness of this
approach is limited by the difficulty of anticipating future usage patterns, as well as the
inability to split file systems across the drives. For example, if a single file system receives
the most disk accesses, moving the file system to another drive also moves the bottleneck
to that drive.
VxVM can split volumes across multiple drives. This permits you a finer level of
granularity when locating data. After measuring actual access patterns, you can adjust
your previous decisions on the placement of file systems. You can reconfigure volumes
online without adversely impacting their availability.