Veritas Volume Manager 4.1 Administrator's Guide (HP-UX 11i v3, February 2007)

Chapter 3, Administering Dynamic Multipathing (DMP)
Administering DMP Using vxdmpadm
115
Listing Information About Host I/O Controllers
The following command lists attributes of all host I/O controllers on the system:
# vxdmpadm listctlr all
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c1 OTHER ENABLED other0
c2 X1 ENABLED jbod0
c3 ACME ENABLED enc0
c4 ACME ENABLED enc0
This form of the command lists controllers belonging to a specified enclosure and
enclosure type:
# vxdmpadm listctlr enclosure=enc0 type=ACME
CTLR-NAME ENCLR-TYPE STATE ENCLR-NAME
=====================================================
c2 ACME ENABLED enc0
c3 ACME ENABLED enc0
Listing Information About Enclosures
To display the attributes of a specified enclosure, use the following command:
# vxdmpadm listenclosure enc0
ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE
==================================================================
enc0 A3 60020f20000001a90000 CONNECTED A/P
The following command lists attributes for all enclosures in a system:
# vxdmpadm listenclosure all
The following is example output from this command:
ENCLR_NAME ENCLR_TYPE ENCLR_SNO STATUS ARRAY_TYPE
==================================================================
Disk Disk DISKS CONNECTED Disk
ANA0 ACME 508002000001d660 CONNECTED A/A
enc0 A3 60020f20000001a90000 CONNECTED A/P