VERITAS Volume Manager 3.5 User's Guide - VERITAS Enterprise Administrator (September 2004)

File System Tasks
Mounting a File System
Chapter 5 163
After you have provided all necessary information in the dialog box, click
OK.
NOTE
• The specified volume must contain a file system.
• The mount point must be an absolute pathname (that is, it must
begin with /).
Mount Options:
(refer to “Adding a
New File System to
a Volume” on
page 158 for
available options)
• If you want the system to use the mount
options defined in the system table, check
Mount using options in the file
system table.
• Enter the mount point for the file system, if
you want the file system mounted at
system startup.
• Select the Create mount point checkbox
if you want the system to create the mount
point if it does not already exist.
• Select the Read only and Honor setuid
checkboxes, as required.
• To specify mount details, click Mount File
System Details and specify any
additional options using the checkboxes
and Extra Options entry in the Mount
Details dialog box (see Table 5-3, “Mount
Options,” on page 160).