VERITAS Volume Manager 3.5 User's Guide - VERITAS Enterprise Administrator (June 2002)

Chapter 3, Disk Tasks

Replacing Disk

4. Click OK to perform the Disk Replacement.

Notes:

◆ The Replace Disk task requires thename of the disk tobe replacedand the replacement

disk name.

◆ The disk to be replaced must be disconnected or removedfromits dynamic disk group. If

the disk has not failed, remove the disk from its dynamic disk group before you replace

the disk.

◆ The new disk can be a disk in the free disk pool or an uninitialized disk. If the new disk is

uninitialized, the

Replace Disk task places the disk under Volume Manager control.

◆ The new disk is placed in the dynamic disk group of the old disk.