VERITAS Volume Manager 3.5 User's Guide - VERITAS Enterprise Administrator (June 2002)

Task Roadmap
8 VERITAS Volume Manager User’s Guide - VEA
Repair/Recovery Tasks
If disk and/or system failures occur, VxVM generally performs any necessary recovery
operations automatically. However, depending on the circumstances, you may need to
attempt to recover from the situation as follows.
▼ Protect volumes from disk failure
◆ Adding a Disk to VxVM.
◆ Replacing Disk.
These tasks are described in Chapter 3, “Disk Tasks.”
▼ Repair/recover volumes
◆ Recovering a Volume.
◆ Recover all volumes on a failed disk.
◆ Recovering Volumes in Dynamic Disk Groups.
◆ If a volume is not recoverable, restore the volume from backup.
These tasks are described in Chapter 3, “Disk Tasks,” and Chapter 4, “Volume Tasks.”
▼ Repair/recover file systems
◆ Perform a file system consistency check on any file systems that may be damaged.
(Refer to Chapter 5, “File System Tasks.”)