VERITAS Volume Manager 3.5 Troubleshooting Guide (September 2004)

Error Messages

vxdmp Notice Messages

Chapter 3

• Action: Check the underlying hardware if you want to recover the desired path.

NOTE vxvm:vxdmp:NOTICE:enabled controller controller_name connected to disk array

disk_array_serial_number

• Description: All paths through the controller connected to the disk array are enabled.

This usually happens if a controller is enabled after maintenance.

• Action: None.

vxvm:vxdmp:NOTICE:enabled dmpnode dmpnode_device_number

• Description: A DMP node has been marked enabled in the DMP database. This

happens when at least one path controlled by the DMP node has been enabled.

• Action: None.

vxvm:vxdmp:NOTICE:enabled path path_device_number belonging to dmpnode

dmpnode_device_number

• Description: A path has been marked enabled in the DMP database. This path is

controlled by the DMP node indicated by the speciﬁed device number. This happens

if a previously disabled path has been repaired, the user has reconﬁgured the DMP

database using the vxdctl(1M) command, or the DMP database has been

reconﬁgured automatically.

• Action: None.

vxvm:vxdmp:NOTICE: Path failure on major/minor

• Description: A path under the control of the DMP driver failed. The device major and

minor numbers of the failed device is supplied in the message.

• Action: None.

vxvm:vxdmp:NOTICE:removed disk array disk_array_serial_number

• Description: A disk array has been disconnected from the host, or some hardware

failure has resulted in the disk array becoming inaccessible to the host.

• Action: Replace disk array hardware if this has failed.