VERITAS Volume Manager 3.5 Troubleshooting Guide (August 2002)

82 VERITAS Volume Manager Troubleshooting Guide
install-db file 31
ioconfig file
recreating 27
IOFAIL plex state 3
ioinit
used to recreate ioconfig file 27
K
kernel
NOTICE messages 44
PANIC messages 39
WARNING messages 39
L
LABEL file
creating using mkboot 23
writing VxVM information to 23
listing
unstartable volumes 4
log file
default 37
syslog error messages 38
vxconfigd 37
LOG plex state 8
log plexes
importance for RAID-5 6
recovering RAID-5 11
M
maintenance mode
boot 21
hpux -m command 22
mirrored volumes, recovering 4
mkboot
used to create LABEL file 23
MOVE flag
set in TUTIL0 field 15
N
NEEDSYNC volume state 10
notice messages
added disk array 69
Attempt to disable controller failed 69
Can’t close disk 44
Can’t open disk 44
Could not install sd driver 69
Could not install ssd driver 69
Could not load sd driver 69
Could not load ssd driver 69
Could not lock sd driver 69
Could not lock ssd driver 69
Detached disk 63
Detached log for volume 64
Detached plex in volume 64
Detached subdisk in volume 64
Detached volume 64
disabled controller connected to disk
array 70
disabled dmpnode 70
disabled path belonging to dmpnode 70
enabled controller connected to disk
array 70
enabled dmpnode 70
enabled path belonging to dmpnode 70
ktcvm_check sent to slave node 75
Offlining config copy 64
Path failure 71
read error on object 44
Reason found for abort 75
removed disk array 71
Rootdisk has just one enabled path 69
Unable to resolve duplicate diskid 65
vol_kmsg_sent_wait_callback got
error 76
Volume entering degraded mode 66
P
panic messages
Object association depth overflow 39
parity
regeneration checkpointing 11
resynchronization for RAID-5 10
stale 6
plex kernel states
DISABLED 2, 8
ENABLED 2
plex states
ACTIVE 2
BADLOG 8
CLEAN 2
EMPTY 2
IOFAIL 3
LOG 8
STALE 5
plexes
defined 2
mapping problems 12
recovering mirrored volumes 4
R
RAID-5