VERITAS Volume Manager 3.5 Troubleshooting Guide (August 2002)

vxdmp Notice Messages

70 VERITAS Volume Manager Troubleshooting Guide

vxvm:vxdmp:NOTICE:disabled controller controller_name connected to disk

array disk_array_serial_number

◆ Description: All paths through the controller connected to the disk array are disabled.

This usually happens if a controller is disabled for maintenance.

◆ Action: None.

vxvm:vxdmp:NOTICE:disabled dmpnode dmpnode_device_number

◆ Description: A DMP node has been marked disabled in the DMP database. It will no

longer be accessible for furtherIO requests. This occurswhen allpaths controlledby a

DMP node are in the disabled state, and therefore inaccessible.

◆ Action: Check hardware or enable the appropriate controllers to enable at least one

path under this DMP node.

vxvm:vxdmp:NOTICE:disabled path path_device_number belonging to dmpnode

dmpnode_device_number

◆ Description: A path has been marked disabled in the DMP database. This path is

controlled by the DMP node indicated by the speciﬁed device number. This may be

due to a hardware failure.

◆ Action: Check the underlying hardware if you want to recover the desired path.

Note vxvm:vxdmp:NOTICE:enabled controller controller_name connected to

disk array disk_array_serial_number

◆ Description: All paths through the controller connected to the disk array are enabled.

This usually happens if a controller is enabled after maintenance.

◆ Action: None.

vxvm:vxdmp:NOTICE:enabled dmpnode dmpnode_device_number

◆ Description: A DMP node has been marked enabled in the DMP database. This

happens when at least one path controlled by the DMP node has been enabled.

◆ Action: None.

vxvm:vxdmp:NOTICE:enabled path path_device_number belonging to dmpnode

dmpnode_device_number

◆ Description: A path has been marked enabled in the DMP database. This path is

controlled by the DMP node indicated by the speciﬁed device number. This happens

if a previously disabled path has been repaired, the user has reconﬁgured the DMP

database usingthe vxdctl(1M)command, orthe DMP database has been reconﬁgured

automatically.

◆ Action: None.