VERITAS Volume Manager 3.5 Troubleshooting Guide (August 2002)

vxconfigd Notice Messages

64 VERITAS Volume Manager Troubleshooting Guide

◆ Action: If hot-relocation is enabled, VERITAS Volume Manager objects affected by the

disk failure are taken care of automatically. Mail is sent to root indicating what

actions were taken by VxVM and what further actions the administrator should take.

vxvm:vxconfigd: NOTICE: Detached log for volume volume

◆ Description: TheDRL or RAID-5 log for the namedvolume was detached as a resultof

a disk failure, or as a result of the administrator removing a disk with vxdg -k

rmdisk. A failing disk is indicated by a “Detached disk” message.

◆ Action: If the log is mirrored, hot-relocation tries to relocate the failed log

automatically. Use either vxplex dis or vxsd dis to remove the failing logs. Then,

use vxassist addlog (see the vxassist(1M) manual page)to add a new logto the

volume.

vxvm:vxconfigd: NOTICE: Detached plex plex in volume volume

◆ Description: The speciﬁed plex was disabled as a result of a disk failure, or as a result

of the administrator removing a disk with vxdg -k rmdisk. A failing disk is

indicated by a “Detached disk” message.

◆ Action: If hot-relocation is enabled, VERITAS Volume Manager objects affected by the

disk failure are taken care of automatically. Mail is sent to root indicating what

actions were taken by VxVM and what further actions the administrator should take.

vxvm:vxconfigd: NOTICE: Detached subdisk subdisk in volume volume

◆ Description: The speciﬁed subdisk was disabled as a result of a disk failure, or as a

result of the administrator removing a disk with vxdg -k rmdisk. A failing disk is

indicated by a “Detached disk” message.

◆ Action: If hot-relocation is enabled, VERITAS Volume Manager objects affected by the

disk failure are taken care of automatically. Mail is sent to root indicating what

actions were taken by VxVM and what further actions the administrator should take.

vxvm:vxconfigd: NOTICE: Detached volume volume

◆ Description: The speciﬁed volume was detached as a result of a disk failure, or as a

result of the administrator removing a disk with vxdg -k rmdisk. A failing disk is

indicated by a “Detached disk” message. Unless the disk error is transient and can be

ﬁxed with a reboot, the contents of the volume should be considered lost.

◆ Action: Contact Customer Support.

vxvm:vxconfigd: NOTICE: Offlining config copy number on disk disk:

Reason: reason

◆ Description: AnI/O errorcaused the indicatedconﬁguration copy to bedisabled. This

is a notice only, and does not normally imply serious problems, unless this is the last

active conﬁguration copy in the disk group.