VERITAS Volume Manager 3.5 Migration Guide (September 2004)

Chapter 4
SAM and the VEA
Listing Logical Volumes in SAM
56
Listing Logical Volumes in SAM
To list logical volumes in SAM, from the Disks and File Systems SAM area, select Logical Volumes. The
Logical Volumes screen lists the LVM logical volumes and the VxVM volumes on the system. The “Type”
column indicates whether a volume is controlled by LVM or VxVM. The “Use” column shows whether a
volume is in use and if so, what it is used for.
The following figure shows a Logical Volumes screen for the same example system. The eight LVM logical
volumes in vg00 are used for HFS and VxFS file systems and for swap and dump. The bells VxVM volume in
maroon is used for VxFS and has a directory mounted on it. The vol01 VxVM volume in rootdg is not
currently in use. See the figure “Listing LVM Logical Volumes and VxVM Volumes with SAM” on page 56.
Figure 4-2 Listing LVM Logical Volumes and VxVM Volumes with SAM