VERITAS Volume Manager 3.5 Migration Guide (August 2002)

Listing Logical Volumes in SAM Final 24 July 2002
62 VERITAS Volume Manager Migration Guide
Listing Logical Volumes in SAM
To list logical volumes in SAM, from the Disks and File Systems SAM area, select Logical
Volumes. The Logical Volumes screen lists the LVM logical volumes and the VxVM
volumes on the system. The “Type” column indicates whether a volume is controlled by
LVM or VxVM. The “Use” column shows whether a volume is in use and if so, what it is
used for.
The following figure shows a Logical Volumes screen for the same example system. The
eight LVM logical volumes in vg00 are used for HFS and VxFS file systems and for swap
and dump. The bells VxVM volume in maroon is used for VxFS and has a directory
mounted on it. The vol01 VxVM volume in rootdg is not currently in use. See the figure
“Listing LVM Logical Volumes and VxVM Volumes with SAM” on page 63.