VERITAS Volume Manager 3.5 Installation Guide (August 2002)

Chapter 5, Getting Started with VxVM
System Setup Guidelines
63
System Setup Guidelines
This section contains information to help you set up your system for efficient storage
management. For specific setup tasks, refer to the VERITAS Volume Manager
Administrator’s Guide.
The following system setup sequence is typical and is used as an example. Your system
requirements may differ. The system setup guidelines provide helpful information for
specific setup configurations.
▼ Initial Setup
1. Place disks under VxVM control.
2. Create new disk groups (if you do not want to use rootdg only, or you require
additional disk groups).
3. Create volumes.
4. Put file systems on volumes.
▼ Options
❖ Designate hot-relocation spare disks.
❖ Add mirrors to volumes.
▼ Maintenance
❖ Resize volumes and file systems.
❖ Add more disks or disk groups.
❖ Create snapshots.
The following general guidelines are to help you understand andplan an efficient storage
management system. See the cross-references in each section for more information about
the featured guideline.