VERITAS Volume Manager 3.5 Installation Guide (August 2002)

Supported Upgrade Scenarios
54 VERITAS Volume Manager Installation Guide
3. Upgrade from HP-UX 11.0 LVM rootablesystem withVxVM3.1 toHP-UX11iAR0902
LVM rootable system with VxVM 3.5.
Rootability Upgrade Paths
If Your Current
Configuration is ...
... And You Want to
Upgrade to ...
... Then You Need
to ...
Refer to
Scenario 1 Pre-AR0902 HP-UX 11i
LVM rootable, with
VxVM 3.1 configured
HP-UX 11i
AR0902 LVM
rootable with
VxVM 3.5
Upgrade using
the HP AR0902
(or later) CD.
VxVM 3.5 is
installed by
default
“VxVM
Not
Controlling
the Root
Disk” on
page 4
Scenario 2 Pre-AR0902 HP-UX 11i
LVM rootable, with
VxVM 3.1 configured
HP-UX11.11iVxVM
rootablewithVxVM
3.5
InstalltheVxVM 3.5
package from the
VERITAS CD; or
upgradeusing the
HP AR0902 (or
later) CD.
“Installing
VERITAS
Volume
Manager”
on page 25
Scenario 3 An HP-UX 11.0 LVM
rootable system, with
VxVM 3.1 configured
HP-UX 11i LVM
rootablewithVxVM
3.5
1. Follow the
migration
procedure to
save the VxVM
3.1
configuration.
Remove the old
VxVM package.
2. Upgrade using
the HP AR0902
(or later) CD
“Migration
Procedure”
on page 55
“VxVM
Not
Controlling
the Root
Disk” on
page 4