VERITAS Volume Manager 3.5 Administrator's Guide (September 2004)

Commands Summary
Appendix A410
appropriate manual page in the 1M section.
Table A-1 Obtaining Information About Objects in VxVM
Command Description
vxdisk list [diskname] Lists disks under control of VxVM. See
“Displaying Disk Information” on
page 102.
vxdg list [diskgroup] Lists information about disk groups. See
“Displaying Disk Group Information” on
page 134.
vxdg -s list Lists information about shared disk
groups in a cluster. See “Creating
Volumes with Exclusive Open Access by
a Node” on page 366.
vxinfo [-g diskgroup]
[volume ...]
Displays information about the
accessibility and usability of volumes.
See “Stopping a Volume” on page 257.
vxprint -hrt [object] Prints single-line information about
objects in VxVM. See “Displaying
Volume Information” on page 249.
vxprint -st [subdisk] Displays information about subdisks.
See “Displaying Subdisk Information”
on page 180.
vxprint -pt [plex] Displays information about plexes. See
“Displaying Plex Information” on
page 195.
Table A-2 Administering Disks
Command Description
vxdiskadm Administers disks in VxVM using a
menu-based interface.
vxdiskadd [devicename] Adds a disk specified by device name.
See “Using vxdiskadd to Place a Disk
Under Control of VxVM” on page 84.