VERITAS Volume Manager 3.5 Administrator's Guide (September 2004)

Administering Disks
Removing and Replacing Disks
Chapter 2 97
The following devices are available as replacements:
c0t1d0
You can choose one of these disks to replace disk02.
Choose "none" to initialize another disk to replace disk02.
Choose a device, or select "none"
[<device>,none,q,?] (default: c0t1d0)
Step 4. If the disk has not previously been initialized, press Return at the
following prompt to replace the disk:
The requested operation is to initialize disk device c0t1d0 and to then use that
device to replace the removed or failed disk disk02 in disk group rootdg.
Continue with operation? [y,n,q,?] (default: y)
If the disk has already been initialized, press Return at the following
prompt to replace the disk:
The requested operation is to use the initialized device c0t1d0 to replace the
removed or failed disk disk02 in disk group rootdg.
Continue with operation? [y,n,q,?] (default: y)
Step 5. The vxdiskadm program then proceeds to replace the disk, and returns
the following message on success:
Replacement of disk disk02 in group rootdg with disk device c0t1d0 completed
successfully.
At the following prompt, indicate whether you want to replace another
disk (y) or return to the vxdiskadm main menu (n):
Replace another disk? [y,n,q,?] (default: n)