VERITAS Volume Manager 3.5 Administrator's Guide (September 2002)

Appendix A, Commands Summary
307
Administering Volumes
Command Description
vxassist mirror volume [attributes] Adds a mirror to a volume. See “Adding a
Mirror to a Volume” on page 191.
vxassist remove mirror volume [attributes] Removes a mirror from a volume. See
“Removing a Mirror” on page 193.
vxassist addlog volume [attributes] Addsalogto avolume. See“Adding aDCO
and DCO Volume” on page 193, “Adding
DRL Logging to a Mirrored Volume” on
page 197 and “Adding a RAID-5 Log” on
page 198.
vxassist remove log volume [attributes] Removes a log from a volume. See
“Removing a DCO and DCO Volume” on
page 196, “Removing a DRL Log” on
page 198 and “Removing a RAID-5 Log”on
page 199.
vxvol set fastresync=on|off volume TurnsFastResynconoroffforavolume.See
“Adding a RAID-5 Log” on page 198.
vxassist growto volume length Grows a volume to a specified size. See
“Resizing Volumes using vxassist” on
page 202.
vxassist growby volume length Grows a volume by a specified size. See
“Resizing Volumes using vxassist” on
page 202.
vxassist shrinkto volume length Shrinks a volume to a specified size. See
“Resizing Volumes using vxassist” on
page 202.
vxassist shrinkby volume length Shrinks a volume by a specified size. See
“Resizing Volumes using vxassist” on
page 202.
vxresize -b -F xvfs volume length \
diskname ...
Resizes a volume and the underlying
VERITAS File System. See “Resizing
Volumes using vxresize” on page 201.