VERITAS Volume Manager 3.5 Administrator's Guide (September 2002)

301
Commands Summary
A
This appendix summarizes the usage and purpose of important commands in VERITAS
Volume Manager (VxVM). References are included to longer descriptions in the
remainder of this book. For detailed information about an individual command, refer to
the appropriate manual page in the 1M section.
Obtaining Information About Objects in VxVM
Command Description
vxdisk list [diskname] Lists disks under control of VxVM. See
“Displaying Disk Information” on page 83.
vxdg list [diskgroup] Lists information about disk groups. See
“Displaying Disk Group Information” on
page 109.
vxdg -s list Lists information about shared disk groups in a
cluster. See “Creating Volumes with Exclusive
Open Access by a Node” on page 266.
vxinfo [-g diskgroup] [volume ...] Displays information about the accessibility and
usability of volumes. See “Stopping a Volume”
on page 189.
vxprint -hrt [object] Prints single-line information about objects in
VxVM.See“DisplayingVolumeInformation”on
page 183.
vxprint -st [subdisk] Displays information about subdisks. See
“Displaying Subdisk Information” on page 140.
vxprint -pt [plex] Displays information about plexes. See
“Displaying Plex Information” on page 148.