VERITAS Volume Manager 3.5 Administrator's Guide (September 2002)
Chapter 4, Creating and Administering Disk Groups
Deporting a Disk Group
113
If you choose y, then all subdisks are moved off the disk, if possible. Some subdisks may
not be movable. The most common reasons why a subdisk may not be movable are as
follows:
◆ There is not enough space on the remaining disks.
◆ Plexes or striped subdisks cannot be allocated on different disks from existing plexes
or striped subdisks in the volume.
If vxdiskadm cannot move some subdisks, you may need to remove some plexes from
some disks to free more space before proceeding with the disk removal operation.
Deporting a Disk Group
Deporting a disk group disables access to a disk group that is currently enabled
(imported) by the system. Deport a disk group if you intend to move the disks in a disk
group to another system. Also, deport a disk group if you want to use all of the disks
remaining in a disk group for a new purpose.
To deport a disk group, use the following procedure:
1. Stop all activity by applications to volumes that are configured in the disk group that
is to be deported. Unmount filesystems and shut down databases that are configured
on the volumes.
2. Use the following command to stop the volumes in the disk group:
# vxvol -g diskgroup stopall
3. Select menu item 8 (Remove access to (deport) a disk group) from the
vxdiskadm main menu.
4. At the following prompt, enter the name of the disk group to be deported (in this
example, newdg):
Remove access to (deport) a disk group
Menu: VolumeManager/Disk/DeportDiskGroup
Use this menu operation to remove access to a disk group that is
currently enabled (imported) by this system. Deport a disk
group if you intend to move the disks in a disk group to another
system. Also, deport a disk group if you want to use all of the
disks remaining in a disk group for some new purpose.
You will be prompted for the name of a disk group. You will also
be asked if the disks should be disabled (offlined). For
removable disk devices on some systems, it is important to