VERITAS Volume Manager 3.2 for HP-UX Release Notes

Initializing the VERITAS Volume Manager for HP-UX

Chapter 158

disk array individually. For each disk, respond with the desired disk name and

press

<Return>.

The example continues with the default y response.

The enc0_1 disk will be given disk name disk05

The enc0_1 disk appears to be empty. Adding as a new disk.

The enc0_2 disk will be given disk name disk06

The enc0_2 disk appears to be empty. Adding as a new disk.

The enc0_3 disk will be given disk name disk07

The enc0_3 disk appears to be empty. Adding as a new disk.

The c1t0d0 disk will be given disk name disk01

The c1t1d0 disk will be given disk name disk02

The c1t2d0 disk will be given disk name disk03

The c1t3d0 disk will be given disk name disk04

Hit RETURN to continue.

The following is a summary of your choices.

c0t5d0 New Disk

c1t0d0 New Disk

c1t1d0 New Disk

c1t2d0 New Disk

c2t2d3 New Disk

c3t0d0 New Disk

c3t1d0 New Disk

c3t2d0 New Disk

Is this correct [y,n,q,?] (default: y) y

NOTE This is your last chance to review and alter your choices for how to handle any

of the disks to be placed under VxVM control.

If you enter y, vxinstall initializes (destroying any existing data) all disks

listed with New Disk.

If you enter n, vxinstall prompts you for the name of a disk to be removed

from the list and excluded from VxVM control. To remove a disk from the list,

enter the name of the disk to be removed from the list and press

<Return>.

Repeat for each disk to be removed and then press <Return> once more.

vxinstall displays an updated summary. If you are satisfied with the

summary, enter y.