VERITAS Volume Manager 3.2 for HP-UX Release Notes
VERITAS Volume Manager 3.2 for HP-UX Release Notes
Installing VERITAS Volume Manager for HP-UX on HP-UX 11i
Chapter 1 45
Installing VERITAS Volume Manager for HP-UX on HP-UX
11i
This section describes installation of the following VERITAS Volume Manager for HP-UX
products:
Base-VXVM Base VERITAS Volume Manager 3.2 for HP-UX, included free of charge
with the HP-UX 11i Application Release.
B9116AA VERITAS Volume Manager 3.2 for HP-UX, purchased separately. The
software is also on the HP-UX 11i Application Release, but you must
purchase B9116AA to obtain the codeword needed to unlock the software.
If you have purchased B9116AA, then install B9116AA as described below. If you have not
purchased B9116AA, then install Base-VXVM as described below.
NOTE If you installed Base-VXVM from any of the HP-UX 11i Operating
Environments (Internet, Enterprise, Mission Critical, Technical Computing, or
Minimum Technical), and you do not want to install B9116AA, then you have
already completed this installation procedure. Next, initialize the Volume
Manager using vxinstall. See “Initializing the VERITAS Volume Manager for
HP-UX” for the procedure.
If you installed Base-VXVM from the HP-UX 11i Internet, Enterprise, or
Mission Critical OE and you also want to install B9116AA, then follow the
procedure below.
NOTE If you purchase B9116AA at a later time, you can install it later. Do not remove
Base-VXVM before installing B9116AA; doing so would cause you to lose data.
The Base VERITAS Volume Manager 3.2 for HP-UX, Base-VXVM, comprises two swinstall
products:
HPvxvm the VERITAS Volume Manager software
HPvmsa the VERITAS Volume Manager Storage Administrator, which is the
graphical user interface for administering VxVM.
The VERITAS Volume Manager 3.2 for HP-UX, B9116AA, installs Base-VXVM, if it is not
already installed.