VERITAS Volume Manager 3.1 Storage Administrator Administrator's Guide

Volume Tasks
Removing a QuickLog Log
Chapter 4 209
Removing a QuickLog Log
This procedure detaches a QuickLog log device from a volume. Before
you remove a QuickLog log, you must disable the log (see “Disabling the
QuickLog Log for a File System”).
To remove a QuickLog log from a volume
Step 1. Select the volume with the QuickLog log device to be detached.
Step 2. Choose Volumes > QuickLog > Remove Log (Selected menu) or Volume
Remove FS Log (Command Launcher).
Step 3. Complete the QuickLog Remove Log dialog box as follows:
When you have provided all necessary information in the dialog box,
click OK.
Volume Name: If the correct volume name is not already displayed in
this field, type the volume’s name or click Browse to
select the volume.
Notes:
• This task is only available if VERITAS QuickLog is installed.
• This task requires a volume name.
• The QuickLog log for the file system must be disabled before the
QuickLog log can be detached from a volume.