VERITAS Volume Manager 3.1 Reference Guide

92 Chapter2
Error Messages
Cluster Error Messages
• Action
Restart the vxconfigd daemon.
vxconfigd not ready
node #: vxconfigd is not communicating properly
• Description
The vxconfigd daemon is not responding properly.
• Action
Stop and restart the vxconfigd daemon.
vxiod count must be above # to join cluster
ERROR: vxiod count must be above 5 to join cluster
• Description
The number of Volume Manager kernel daemons (vxiod) is less than
the minimum number needed to join the cluster.
• Action
Increase the number of daemons using vxiod.
Insufficient DRL log size: logging is disabled.
• Description
A volume with an insufficient DRL log size was started. The volume
gets started successfully, but DRL logging is disabled and a full
recovery is performed.
• Action
Create a new DRL of sufficient size.
This node was running different CM. Please Reboot.
• Description
VxVM supports clustering under the control of various cluster
managers. However, once a node joins the cluster under a particular
cluster manager, it cannot be restarted under a different cluster
manager until it is rebooted.
• Action