VERITAS Volume Manager 3.1 Reference Guide

Chapter 2 87
Error Messages
Cluster Error Messages
Cluster Error Messages
This section presents error messages that may occur with the Volume
Manager in a cluster environment. Each message is accompanied by an
explanation and a suggested user action.
NOTE Some of these messages may appear on the console; others are returned
by vxclust.
Attempt to start the restore daemon that is already
running
vxvm:vxdmpadm: ERROR:The VxVM restore daemon is already
running. To change any of its parameters, stop and
restart the
restore daemon with the new set of arguments.
• Description
vxdmpadm utility returns this error message when the vxdmpadm
start restore command is executed while the restore daemon is
running.
• Action
Stop the restore daemon. Restart the restore daemon with the
required set of parameters.
Error in cluster processing
• Description
This may be due to an operation inconsistent with the current state of
the cluster (such as an attempt to import or deport a shared disk
group from the slave). It may also be caused by an unexpected
sequence of commands from vxclust.
• Action
Make sure that the operation can be performed in the current
environment.
Cannot find disk on slave node