VERITAS Volume Manager 3.1 Reference Guide

Chapter 2 85
Error Messages
DMP Error Messages
• Action
Check hardware and see if this controller is present and I/Os can be
done through it
Attempt to enable a controller that is not available
vxvm:vxdmpadm:ERROR:
Attempt to enable a controller that is not available
• Description
This message is returned by the vxdmpadm utility when an attempt to
enable a controller that is not working or physically present is made.
To enable a controller, it should be visible to the OS and I/Os should
be possible through it.
• Action
Check hardware and see if this controller is present and I/Os can be
done through it
Attempt to start the restore daemon that is already
running
vxvm:vxdmpadm: ERROR:The VxVM restore daemon is already
running. To change any of its parameters, stop and
restart the
restore daemon with the new set of arguments.
• Description
vxdmpadm utility returns this error message when the vxdmpadm
start restore command is executed while the restore daemon is
running.
• Action
Stop the restore daemon. Restart the restore daemon with the
required set of parameters.
Attempt to disable the last enabled path to a device
vxvm:vxdmpadm: ERROR: Attempt to disable controller
failed. One
(or more) devices can be accessed only through this
controller.
Use the -f option if you still want to disable this
controller.