VERITAS Volume Manager 3.1 Reference Guide

Chapter 2 83
Error Messages
DMP Error Messages
• Description
The dmpnode with the device number indicated in the message, has
been marked disabled in the DMP database. It will no longer be
accessible to further IOs. It happens when all paths controlled by a
DMP node are in the disabled state, and therefore inaccessible.
• Action
Check hardware or enable the appropriate controllers in order to get
at least one path under this dmpnode in the enabled state. This will
enable the dmpnode specified.
Enabled dmpnode
vxvm:vxdmp:NOTICE:enabled dmpnode dmpnode device number
• Description
The dmpnode with the device number indicated by the message has
been marked enabled in the DMP database. It will now allow IOs.
This happens when at least one path controlled by this dmpnode has
been enabled.
• Action
None.
Disabled controller connected to a disk array
vxvm:vxdmp:NOTICE:
disabled controller controller name connected to disk
array
disk array serial number
• Description
All paths that go through the specified controller connected to the
specified disk array, are in disabled state. This happens user chooses
to disable a particular controller for maintenance tasks.
• Action
None.
Enabled controller connected to a disk array
vxvm:vxdmp:NOTICE:
enabled controller controller name connected to disk