VERITAS Volume Manager 3.1 Reference Guide

40 Chapter2
Error Messages
Volume Manager Configuration Daemon Error Messages
Usage: vxconfigd - short
Usage: vxconfigd [-dkf] [-r reset] [-m mode] [-x level]
For detailed help use: vxconfigd help
• Description
This is the standard vxconfigd usage error message. Appearance of
this message implies that some option was supplied incorrectly.
• Action
If you need help in using vxconfigd, try using the command
vxconfigd help.
For more detailed information, see the vxconfigd(1M) manual page.
-r must be followed by ’reset’
-r must be followed by ’reset’
• Description
This is a usage error. The -r option requires an option argument
consisting of the string reset.
• Action
Either don’t use the -r option, or supply the reset option argument.
-x argument: invalid debug string
-x argument: invalid debug string
• Description
An unrecognized string was specified as an argument to the -x
option.
• Action
See vxconfigd(1M) for a list of valid arguments to -x.
-x devprefix=device_prefix: prefix too long
-x devprefix= device_prefix : prefix too long
• Description
The -x devprefix= device_prefix option was used to define a prefix
path for the /dev/dsk and /dev/rdsk directories, and that prefix was
too long.