VERITAS Volume Manager 3.1 Migration Guide

Conversion Error Messages
Appendix A 91
The conversion process was unable to deactivate the volume group.
The conversion cannot proceed without reboots being done. If you
choose to not reboot your system, the conversion will be aborted.
• Action
The system responds with an option to complete the conversion by
rebooting the system.
Message Analysis shows that there is insufficient private
space available to convert this volume group.
• Description
The error message indicates the maximum amount of records that
can be stored in the private space, and how many records are needed
to convert this particular volume group.
• Action
You can reduce the number of records needed by reducing the number
of logical volumes in volume group by combining some of the logical
volumes together.
Message Analysis indicates that this volume group cannot be
converted because not all of the disks and/or volumes
in the LVM volume group are currently accessible
• Description
For successful conversion, all physical volumes in a volume group
must be on-line, and all logical volumes must be active and accessible.
• Action
Make sure the physical volumes in a volume group are on-line and
the logical volumes are active and not in use.
Message The conversion process was unable to deactivate the
volume group vol_grp_name. The conversion cannot
proceed without reboots being done. If you choose
to not reboot your system, the conversion will be
aborted.
• Description
This indicates that the conversion process cannot deactivate the
volume group.