VERITAS Volume Manager 3.1 Migration Guide

SAM and Storage Administrator
Listing Logical Volumes in SAM
Chapter 4 87
Listing Logical Volumes in SAM
To list logical volumes in SAM, from the Disks and File Systems SAM
area, select Logical Volumes. The Logical Volumes screen lists the LVM
logical volumes and the VxVM volumes on the system. The “Type”
column indicates whether a volume is controlled by LVM or VxVM. The
“Use” column shows whether a volume is in use and if so, what it is used
for.
The following figure shows a Logical Volumes screen for the same
example system. The eight LVM logical volumes in vg00 are used for
HFS and VxFS file systems and for swap and dump. The bells VxVM
volume in maroon is used for VxFS and has a directory mounted on it.
The vol01 VxVM volume in rootdg is not currently in use. See Figure 4-3,
Listing LVM Logical Volumes and VxVM Volumes with SAM,
Figure 4-3 Listing LVM Logical Volumes and VxVM Volumes with SAM