VERITAS Volume Manager 3.1 Administrator's Guide

Volume Manager Operations
Online Relayout
Chapter 3100
3. Not a Relayout, but a convert operation.
4. Changes mirroring to RAID-5 and/or stripe width/column changes.
5. Changes mirroring to RAID-5 and/or stripe width/column changes.
6. Changes stripe width/column and remove a mirror.
7. Adds columns.
8. Not a Relayout operation.
9. A convert operation.
10.Changes mirroring to RAID-5. See the vxconvert procedure.
11.Removes a mirror; not a Relayout operation.
12.Removes a mirror and add striping.
13.Changes an old mirrored volume to a stripe mirror. Relayout is valid
only if there are changes to columns/stripe width; otherwise, this is a
convert operation. See the vxconvert procedure.
14.Changes an old mirrored volume to a concatenated mirror. Relayout
is valid only if there are changes to columns; otherwise, this is a
convert operation.
15.No changes; not a Relayout operation.
16.Changes an old mirrored volume to RAID-5. Choose a plex in the old
mirrored volume to use Relayout. The other plex is removed at the
end of the Relayout operation.
17.Unless you choose a plex in the mirrored volume and change the
column/stripe width, this is not a Relayout operation.
18.Unless you choose a plex in the mirrored volume and change the
column/stripe width, this is not a Relayout operation.
19.Not a Relayout operation.
20.Changes stripe width/column.
21.Removes parity and all columns.
22.Removes parity.
23.No changes; not a Relayout operation.
24.Removes columns.
25.Changes stripe width/number of columns.