Veritas Storage Foundation Portable Data Containers: Cross-Platform Data Sharing 5.0.1 Administrators Guide, HP-UX 11i v3, First Edition, November 2009

Table B-1
Error codes and required actions (continued)
ActionMessageError number
Increase the number of device
nodes allowed in the disk group,
if not already at the maximum.
Otherwise, you need to remove
volumes from the disk group,
possibly by splitting the disk
group.
Too many device nodes in disk
group
341
Use a smaller map length for the
DRL/DCM log, or increase the log
length and retry.
Map length too large for current
log length
342
Remove the DRL/DCM log, then
add it back after changing the
alignment of the disk group.
Volume log map alignment
violates disk group alignment
343
Import the disk group on the
platform that created the RVG. To
import the disk group on this
platform, first remove the RVG on
the creating platform.
Disk group contains an old-style
RVG which cannot be imported on
this platform
345
Ensure that cache attribute value
is a multiple of 8K.
Cache object autogrow by
max_autogrow violates disk group
alignment
346
Retry the command as it was
temporarily disallowed by the
vxcdsconvert command
executing at the same time.
User transactions are disabled for
the disk group
347
Contact Technical Support.Disk is in use348
67Recovering from CDS errors
CDS error codes and recovery actions