Veritas Storage Foundation Portable Data Containers: Cross-Platform Data Sharing 5.0.1 Administrators Guide, HP-UX 11i v3, First Edition, November 2009

Table B-1
Error codes and required actions (continued)
ActionMessageError number
Do one of the following:
■ Add the disk to another disk
group that is a non-CDS disk
group.
■ Re-initialize the disk as a CDS
disk so that it can be added to
the CDS disk group.
■ Change the CDS disk group
into a non-CDS disk group and
then add the disk.
Non-CDS disk cannot be placed in
a CDS disk group
333
Change the alignment of the disk
group to 8K and then retry setting
the CDS attribute for the disk
group.
Disk group alignment not CDS
compatible
334
Ensure that sub-disk length value
is a multiple of 8K.
Subdisk length violates disk group
alignment
335
Ensure that sub-disk offset value
is a multiple of 8K.
Subdisk offset violates disk group
alignment
336
Ensure that sub-disk plex offset
value is a multiple of 8K.
Subdisk plex offset violates disk
group alignment
337
Ensure that plex stripe width
value is a multiple of 8K.
Plex stripe width violates disk
group alignment
338
Ensure that thelength of the
volume is a multiple of 8K.
For a log, set the value of the
dgalign_checking attribute to
round. This ensurs e that the
length of the log is silently
rounded to a valid value.
Volume or log length violates disk
group alignment
339
Reassociate the DM record prior
to upgrading.
Last disk media offset violates disk
group alignment
340
Recovering from CDS errors
CDS error codes and recovery actions
66