Veritas Storage Foundation Intelligent Storage Provisioning 5.0.1 Solutions Guide, HP-UX 11i v3, First Edition, November 2009

4
Register a site record for each site with the disk group:
# vxdg -g diskgroup -f addsite sitename
Note: As a side effect of this command, any volumes with unsupported
configurations (for example, RAID-5 volumes) or with an incorrect layout
(not mirrored across the sites) have the allsites=off attribute set on them.
5
Turn on site consistency for the disk group:
# vxdg -g diskgroup set siteconsistent=on
6
If required, use the vxassist transform commands to convert any
unsupported volumes to a supported layout such as mirror or mirror-stripe.
Specify the siteconsistent=on attribute to ensure that the plexes are
mirrored across the sites.
Remote Mirror solutions
About Remote Mirror configurations
46