Veritas Storage Foundation Intelligent Storage Provisioning 5.0.1 Administrators Guide, HP-UX 11i v3, First Edition, November 2009

Table F-2
Creating and administering storage pools
DescriptionCommand
Creates a storage pool.
See “Creating a storage pool” on page 51.
vxpool [-g diskgroup] \
create storage_pool \
[dm=dm1[,dm2...] \
[description="description"]\
[autogrow=1|2] \
[selfsufficient=1|2|3] \
[rules=rule[,rule ...]
Adds one or more disks to a storage pool.
See “Adding disks to a storage pool” on page 54.
vxpool [-g diskgroup] \
adddisk storage_pool \
dm=dm1[,dm2,...]
Removes one or more disks from a storage pool.
See “Removing disks from a storage pool”
on page 54.
vxpool [-g diskgroup] \
rmdisk storage_pool \
dm=dm1[,dm2,...]
Associates one or more templates with a storage
pool.
See “Associating templates with a storage pool”
on page 55.
vxpool [-g diskgroup] \
assoctemplate storage_pool \
t1[,t2,...]
Associates one or more template sets with a
storage pool.
See “Associating template sets with a storage
pool” on page 55.
vxpool [-g diskgroup] \
assoctemplateset\
storage_pool \
ts1[,ts2,...]
Dissociates one or more templates from a storage
pool.
See “Dissociating templates from a storage pool”
on page 56.
vxpool [-g diskgroup] \
distemplate storage_pool \
t1[,t2,...]
Displays information about storage pools.
See “Displaying information about storage pools”
on page 56.
vxpool [-g diskgroup] \
print storage_pool \
[storage_pool ...]
Command summary
About ISP commands
222