Veritas Storage Foundation Intelligent Storage Provisioning 5.0.1 Administrators Guide, HP-UX 11i v3, First Edition, November 2009

The number of volumes to be created. The
volumes are named using the specified volume
name as a prefix with a number starting from 1
appended. If any volume names already exist in
the same pool with the same prefix and an
appended number, numbering starts at the
highest number found plus 1.
nvol number
Alias for nvol.nvols number
The name of the storage pool.pool "poolname"
The stripe unit width for a RAID-5 column.raid5_stripeunit width
The size of a RAID-5 log whose creation is implied
by the specified capabilities or templates.
raid5loglen length
The size of each region that is tracked by a bit in
the maps within a version 20 DCO volume. The
value of size must be a power of 2 and be greater
than or equal to 16k (16KB). The default value is
64k (64KB).
regionsize size
The rules that are to be applied during volume
creation.
rules { volume-rules }
Whether spare disks can be used for
hot-relocation, or only spare disks are to be used.
spare yes|no|only
The stripe unit width.stripe_stripeunit width
A tag that is assigned to the volume.tag "volume_tag"
A tag that can be used to track the volume
creation task.
tasktag "tag"
Whether a volume is to be used for user data (such
as a database or file system), as a full-sized instant
snapshot volume, or as a cache volume for
space-optimized instant snapshots.
type data|snapshot| cachevolume
The user ownership of a volume.user "user"
The user templates that are to be used to create
a volume.
user_template ut1[,ut2...]
The usage type of a volume, such as fsgen or
raid5.
usetype "volume-usage-type"
Volume group definition syntax
About the syntax of volume group definition
212