Veritas Storage Foundation for Oracle 5.0 Graphical User Interface Guide, HP-UX 11i v3, First Edition, May 2008

5
For the snapshot database information section, verify the snapplan file and
Snapshot disk group name. These are read-only fields. Enter the new Oracle
SID and Relocate path in the appropriate fields.
To start an on-host snapshot database, the Relocate path is required. Make
sure the Relocate path has the database owner's permission.
6
See creating and working with snapplans using dbed_vmchecksnap in the
Veritas Storage Foundation for Oracle Administrator's Guide.
7
Click Create Clone Database.
If the snapshot database was successfully started, you will receive a
confirmation message. Click OK to continue.
Create snapshot for clone database
If you are using an existing snapplan to create the clone database, some parameters
are required.
To create a clone database with an existing snapplan using default settings
1
Access the Create Clone Database wizard.
See “Accessing clone database tasks in the Java GUI” on page 27.
See “Accessing database tasks in the Web GUI” on page 35.
2
In the Create Clone Database dialog, select create a clone database using
Database FlashSnap. Click Next.
3
In the DatabaseFlashSnapCloneDatabase dialog, select Existing Snapplan.
The snapplan displays its status. For example, sp00 [init_db]
/ora_home/snapplan/sp00, where INIT_DB is the status of the snapplan.
4
Select a snapplan from the drop-down list SNAPSHOT_END status. The Startup
Snapshot Database dialog displays.
5
Use the dialog procedure for Startup Clone Database:
See “To start up a snapshot using the Create Clone Database wizard” on page 57.
To create a clone database with an existing snapplan using INIT_FULL
1
Access the Create Clone Database wizard.
See “Accessing clone database tasks in the Java GUI” on page 27.
See “Accessing database tasks in the Web GUI” on page 35.
2
In the Create CloneDatabase dialog, select ExistingSnapplan. The snapplan
displays its status. For example, sp00 [init_full]
/ora_home/snapplan/sp00, where INIT_FULL is the status of the snapplan.
Using a clone database
Creating a clone database
58