Veritas Storage Foundation for Oracle 5.0 Graphical User Interface Guide, HP-UX 11i v3, First Edition, May 2008

To manually start Veritas Enterprise Administrator Service
1
Verify the status of the VEA Service:
# /opt/VRTSob/bin/vxsvcctrl status
Current state of server : NOT RUNNING
2
Start the VEA Service:
# /opt/VRTSob/bin/vxsvcctrl start
Initializing Storage Foundation Provider 5.0 for Oracle
If you are using AIX, press to continue after the output is displayed.
3
Again verify the status of the VEA Service:
# /opt/VRTSob/bin/vxsvcctrl status
Current state of server : RUNNING
4
To use the Web GUI, start the Web Console: for the
/opt/VRTSob/webgui/veaw start
Shutting down the Veritas Enterprise Administrator Service
Although the VEA Service should remain running, you may need to shut it down
manually.
To manually shut down Veritas Enterprise administrator Service
1
Verify the status of the VEA Service:
# /opt/VRTSob/bin/vxsvcctrl status
Current state of server : RUNNING
2
Stop the VEA Service:
# /opt/VRTSob/bin/vxsvcctrl stop
Successfully unloaded the Storage Foundation Provider 5.0 for Oracle
Using the VERITAS Storage Foundation for Oracle graphical user interface
Using Veritas Enterprise Administrator Service
22